Intelix MZP Multi-zone Paging and Program
Distribution System
The Intelix MZP Multi-zone Paging and Program
Distribution System is dedicated to total audio management in multi-zone
facilities. This means that MZP is the single-box solution for your
facility's paging, mic/line mixing, and background music needs.
The MZP system combines a sophisticated, ethernet-enabled matrix
mixer with durable remote controls and intuitive design, programming,
and control software. Because the MZP matrix truly mixes levels at each
crosspoint rather than just switching crosspoints on and off, the MZP
automatically ducks program material during a page and then smoothly
ramps the music back to its original level when the page is complete.
Design with Intelix and design with intelligence.
Comet series remotes. Contractors
build program selection and paging stations using Intelix's modular
remote controls. Each remote's exact function is assigned via MZP
Designer software.
Automatic program ducking and ramping
during page. Because Intelix matrix products truly "mix"
levels at each crosspoint rather than just "switch" crosspoints
on and off, the MZP automatically ducks program material during
a page, then smoothly ramps the music back to original levels when
the page is complete.
Integrated audio distribution
and zone paging.The MZP system combines VCA matrix mixer,
setup and control software, and programmable Comet remotes
to handle a wide variety of audio distribution and zone paging applications.
Battery
backup. All response curves, presets, and
current audio matrix values are stored internally in battery-backed
nonvolatile RAM. Even in the event of a power failure, the matrix
mixer saves its settings, ramping all levels back to their previous
values five seconds after power restoration.
Connectivity.
Every MZP Series matrix facilitates serial communication via RS232,
TCP/IP LAN, and the internet. Front and rear panel RS232 communication
ports allow quick onsite diagnostics, and an optional PCMCIA Logic Card
allows up to eight contact closure inputs with eight output indicators.
Contol.
Free MZP Designer Software allows you to monitor, control, and
troubleshoot an entire MZP room combine system from any remote location
with an internet connection. Included real-time event scheduling
software allows you to program repetitive or unique audio activities in
a simple platform closely resembling standard PDA scheduling software.
Security.
To ensure only legitimate users connect to and control the MZP matrix,
MZP Designer Software includes an authorized client list providing
internal firewall protection from unauthorized ethernet connections.
Features
Broadcast Quality
Audio Distribution and Zoned Paging
Mic or Line Level
Automatic Program
Ducking and Ramping During Pages
Up to 128 inputs by
128 outputs
DTMF Phone System
Interfacing
Included Facility
Manager Software
Ethernet Control
Intuitive Remote
Controls
All-Inclusive Design,
Installation, and Control Software
MZP Accessories
Factory-Installed Mic/Line Preamplifiction CardThe
Intelix factory-installed Mic/Line Card provides
+15V phantom power and up to 60 dB of gain for eight
MZP matrix audio input channels (specify one Mic/Line
Card per every eight inputs which require preamplification).
PSM-8The
Intelix PSM-8 Paging Station Microphone is a programmable
remote paging station with eight customizable touch-button
controls for selecting which zone(s) a page will
be routed to. The PSM-8 is available with a gooseneck
microphone (PSM-8) or as only a base (PSM-8-base).
Comet
RemotesIntelix
offers individual Comet remotes for source selection
and volume control, allowing you to customize the
end-user's remote controls based on the application
requirements. All Comets are single wall box mountable,
feature RJ45 connectors for wiring, and are available
in either decora style (decora mount-ready) or panel
style (custom panel mount-ready).
DTMF
Phone Interfacing ModuleThe
Intelix Comet-DTMF module provides a diagnostic
remote interface between PBX and standard analog
phone systems, allowing touchtone phones to control
and page into the MZP system.
Comet
Bridge AdaptorIntelix
Comet-BA4 and Comet-BA11 bridge adaptors simplify
Comet remote wiring while providing a diagnostic
interface should problems arise. The Comet-BA4 distributes
one RJ45 input to four RJ45 outputs, while the Comet-BA11
distributes one input to eleven outputs.
COMET-8-LOGIC
Relay StationThe
Intelix COMET-8-LOGIC is the relay station and interface
for routing contact closure logic commands to the
Intelix MARC matrix.
Factory
ConfigurationIntelix
Factory Configuration is a practical and affordable
option which ensures every MZP installation proceeds
quickly and smoothly. Specifically, Intelix will
optimize your MZP designer software file, program
and load the program file onto the MZP matrix mixer,
test the entire package to ensure proper operation,
generate wiring and product reports, and provide
technical support on a priority basis for two years
from the date of purchase. Factory configuration
is required on all opening MZP matrix orders unless
prior Intelix training has been completed.
MZP
Designer SoftwareIntelix
MZP Designer Software is a unique, all-inclusive
platform designed for the system designer, programmer,
installer, and end-user. MZP Designer Software is
included free with every MZP matrix purchase.
InteliTool
Programming SoftwareIntelix
InteliTool Software
generates RS232 strings for quick and easy programming.
By stepping through a series of simple menus, the
programmer can progressively define specific functions
and the Programmer’s InteliTool will generate
a control string which can be copied for placement
in the control program.
Intelix
MZP Designer Software is a unique, all-inclusive platform
designed specifically for multi-zone paging and program distribution
environments, providing solutions for the system designer,
programmer, and installer.
Specifically, MZP Designer Software:
Contains all the complex logic for
configuring crosspoint levels, duck amounts, output zone groupings, user
control assignments, pre-announce tone triggering,
and DTMF phone interfacing
Provides design and programming tools
though an intuitive platform
Includes assistive software wizards for
quick, straight-forward design, programming, and installation
Allows live control, monitoring,
diagnostics, and troubleshooting for anywhere with an internet
connection...and the software is 100% free.
MZP Designer Software allows you to
design an entire paging system, configure pre-announce tones and DTMF
phone interfacing, program all remote controls, compile wiring reports,
and print a verified sales order in a matter of minutes. Comprehensive
Intelix MZP Designer Software simplifies even the most complex audio
routing tasks.
The
easiest way to prepare an MZP Multi-zone Paging and Program
Distribution System purchase order is to let the MZP Designer
Software prepare the document for you. Every time you design
a system using Intelix Designer Software, a complete parts
list and wiring report is automatically generated, ensuring
nothing is overlooked.
1) Specify the MZP Matrix
Mixer
Determine
the required amount of audio inputs and outputs. Keep
in mind that stereo sources/destinations populate
two inputs/outputs.
Round the number of the
audio inputs to the nearest derivative of eight and
place them within Intelix's part numbering system.
2) Specify Control
Determine
if analog or PBX phone system paging is required.
If
required, specify a Comet-DTMF.
Determine if desktop microphone
paging is required.
If required, specify
aPSM-8 paging station microphone.
Determine if remote control
is required.
If required, specify
Comet remotes or an RS232 controller. If ordering Comet
remotes, specify model and mounting type. Specify one
Comet power supply (Comet PS) per 12 individual
Comet remotes.
Determine if logic control
is required.
If required, specify
one COMET-8-LOGIC.
3) Specify Enhancement
Components
Determine if audio preamplification
or phantom power is required.
If required, specify one Mic/Line
Card for every eight channels.
To simplify
wiring, Intelix recommends Comet-BA4 and Comet-BA11
bridge adaptors.
Regardless
of how you assemble your purchase order, remember that each
system sale is personally handled by an Intelix Application
Engineer who ensures your MZP order is complete and correct.
MZP Applications
MZP
System Drawing
MZP Series Technical Information
MZP16L8L-E Matrix Mixer
*Actual chassis size
and configuration is dependent on the total number of inputs and
outputs
Specifications
General
Frequency Response
+/- dB from 20Hz to 20kHz
+0, -3dB from 10Hz to 30kHz
populate
two inputs/outputs.
MZP16L8L-E Matrix Mixer